Plain Weave Mesh
Boedon, Weaving for Sieving & Filtering
Carbon steel woven mesh is made by weaving low carbon steel wires with a carbon content of 0.25% below. It has good plasticity and toughness and is mainly used for the filtration of rubber, plastic, petroleum and other industries. The carbon steel woven mesh surface can be treated with various surface treatment method including epoxy resin coating, PVC/vinyl coating, PTFE electrostatic spraying and galvanizing to improve the corrosion resistance and tensile strength of the woven wire mesh.
| Item | Mesh (Mesh/Inch) | Guage (#) | Wire Dia. (mm) | Opening (mm) |
|---|---|---|---|---|
| LCS-1 | 10 | 23 | 0.610 | 1.930 |
| LCS-2 | 12 | 24 | 0.550 | 1.566 |
| LCS-3 | 14 | 25 | 0.510 | 1.300 |
| LCS-4 | 16 | 26 | 0.450 | 1.130 |
| LCS-5 | 18 | 29 | 0.350 | 1.060 |
| LCS-6 | 20 | 26 | 0.460 | 0.810 |
| LCS-7 | 20 | 27 | 0.416 | 0.850 |
| LCS-8 | 20 | 31 | 0.295 | 0.970 |
| LCS-9 | 24 | 29 | 0.350 | 0.708 |
| LCS-10 | 30 | 31 | 0.295 | 0.550 |
| LCS-11 | 30 | 30 | 0.315 | 0.530 |
| LCS-12 | 30 | 35 | 0.213 | 0.630 |
| LCS-13 | 40 | 32 | 0.274 | 0.360 |
| LCS-14 | 40 | 33 | 0.254 | 0.380 |
| LCS-15 | 40 | 34 | 0.234 | 0.400 |
| LCS-16 | 40 | 35 | 0.213 | 0.420 |
| LCS-17 | 40 | 36 | 0.193 | 0.442 |
| LCS-18 | 50 | 34 | 0.234 | 0.274 |
| LCS-19 | 50 | 35 | 0.213 | 0.290 |
| LCS-20 | 50 | 36 | 0.193 | 0.310 |
| LCS-21 | 50 | 37 | 0.172 | 0.330 |
| LCS-22 | 56 | 36 | 0.193 | 0.260 |
| LCS-23 | 56 | 37 | 0.172 | 0.281 |
| LCS-24 | 56 | 38 | 0.152 | 0.300 |
| LCS-25 | 60 | 37 | 0.172 | 0.250 |
| LCS-26 | 60 | 38 | 0.152 | 0.270 |
| LCS-27 | 80 | 39 | 0.132 | 0.180 |
Carbon steel woven mesh width inspection
Carbon steel woven mesh top view
Carbon steel woven mesh storage
Carbon steel woven mesh placement
